Skip to content

Country

Check out our YouTube channel for Tutorials, Video Diaries and more.

PCC TUTORIALS - Removing The Seat On Your BMW R9T (And Putting The Battery On Charge)

PCC TUTORIALS - Removing The Seat On Your BMW R9T (And Putting The Battery On Charge)

In this tutorial, we'll show you how to remove the seat of your R9T. This is something that might seem simple once you've done it a couple of times but to those new to the R9T range, we hope it covers off the main points and gives you confidence to do it at home.

Tools Required; A Ratchet, a T30 Torx Bit

Notes; You can use an Optimate or BMW Battery Charger to charge the bike through the DIN Port (like a cigarette lighter socket) on the left hand side of the bike if you prefer, but we like to hook up a set of crocodile clips and charge our bikes the old fashioned way as we find it gives a more solid charge this way.

Older Post
Newer Post

Leave a comment

Please note, comments must be approved before they are published

Blog posts

Rapid Bike EASY vs Rapid Bike EVO for the BMW R nineT

Customers looking for performance gains often ask us which are the best fuelling modules for the BMW R9T, and whether...

PCC x BMW MOTORRAD R18 BUILD - PC.18 Build Walkthrough

We were asked to build a custom R18 for the BMW Motorrad UK stand at the Goodwood Festival of Speed - the UK's larges...

PIER CITY CYCLES TUTORIAL - BMW R9T Rear Shock Absorber Remove & Refit

In this tutorial, we'll show you how to remove and then reinstall the rear suspension shock absorber on the BMW R9T. ...
Close (esc)

Popup

Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Added to cart